Post by andrej on Dec 4, 2020 9:24:59 GMT -5
In this video I will show how to make a light Metro Exodus without a lathe.
Hello everyone and thank you very much for watching my videos.
The idea arose of creating a full copy of the lighter based on the Metro Exodus game.
Break a ton of sites and screenshots, I found that one picture, where Artyom’s lighter itself is depicted in more detail. And it turned out to be Artyom’s diary. The site Metropedia also helped me. The developers made a more detailed description of this product, a special thanks to them.
Rummaging through my trash, I found the missing components for the lighter. Unfortunately, I didn’t have a sleeve of the right size 12.7 x 108 mm, I had to use a sleeve of 12.7 x 99 mm.
A sleeve with a 12.7x99 bullet was taken, spare parts from a Zippo type lighter: this is a chair, a spring and a cover fastener. Rod for silicon with a spring was made of a brass rod 6 mm in diameter. Everything else is shown in the video.
Timestamps:
00:39 Description.
00:42 Drawing.
01:25 List of materials.
02:33 Firing a sleeve.
03:45 Making a cap.
05:00 Production of filler neck.
07:20 Production of a channel for silicon.
08:14 Making fasteners.
12:14 Windproof.
12:47 Trying on the details.
15:00 Build process.
21:00 Installation of silicon.
21:40 Filling with cotton and refueling with gasoline.
25:23 Functional test.
Hello everyone and thank you very much for watching my videos.
The idea arose of creating a full copy of the lighter based on the Metro Exodus game.
Break a ton of sites and screenshots, I found that one picture, where Artyom’s lighter itself is depicted in more detail. And it turned out to be Artyom’s diary. The site Metropedia also helped me. The developers made a more detailed description of this product, a special thanks to them.
Rummaging through my trash, I found the missing components for the lighter. Unfortunately, I didn’t have a sleeve of the right size 12.7 x 108 mm, I had to use a sleeve of 12.7 x 99 mm.
A sleeve with a 12.7x99 bullet was taken, spare parts from a Zippo type lighter: this is a chair, a spring and a cover fastener. Rod for silicon with a spring was made of a brass rod 6 mm in diameter. Everything else is shown in the video.
Timestamps:
00:39 Description.
00:42 Drawing.
01:25 List of materials.
02:33 Firing a sleeve.
03:45 Making a cap.
05:00 Production of filler neck.
07:20 Production of a channel for silicon.
08:14 Making fasteners.
12:14 Windproof.
12:47 Trying on the details.
15:00 Build process.
21:00 Installation of silicon.
21:40 Filling with cotton and refueling with gasoline.
25:23 Functional test.